THÔNG SỐ KỸ THUẬT:
Software:
| ● Cisco IOS ® XE Software Release 17.6.2 or later (For all Regulatory Domains) |
Supported wireless LAN controllers:
| ● Cisco Catalyst 9800 Series Wireless Controllers |
802.11ac:
| ● 4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams |
802.11ax:
| ● 4×4:4 in both 2.4GHz and 5 GHz uplink/downlink MU-MIMO with four spatial streams |
Integrated antenna:
| ● 2.4 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional |
| ● 5 GHz: Peak gain 7 dBi, internal antenna, Vertical Polarization, omnidirectional |
| ● BLE Antenna Gain: 5 dBi, internal antenna, Vertical Polarization, omnidirectional |
Interfaces:
| ● 1x 100/1000/2500 BASE-T (Ethernet) uplink interface |
| ● 1x Gigabit Ethernet SFP |
| ● Supports PoE output (802.3af compliant PSE) on the 1x 10/100/1000 BASE-T (Ethernet) downlink interface if C9124AX powered from one of the following: |
| ◦ UPOE or 802.3bt inline power source (Switch or Power Injector) |
| ◦ DC input (with external power supply rated ³ 60W) |
| ● Management console port (RJ-45) |
Indicators:
| ● Status LED indicates boot loader status, association status, operating status, boot loader warnings |
Dimensions (W x L x H):
| ● Access point (without mounting brackets): 10.2 x 9.2 x 3.2 in. (25.9 x 23.3 x 8.1 cm) |
Weight:
| ● 6.5 lb. (2.9 kg) |
Input power requirements:
| ● 802.3af Power over Ethernet (PoE), 802.3at PoE+, 802.3bt PoE++, Cisco Universal PoE (Cisco UPOE ®) |
| ● Cisco power injector, AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2= |
| ● Cisco power injector, AIR-PWRINJ6= (Note: This injector supports 802.3at) |
| ● DC power source: Auxiliary DC input, 24V to 56V |
