THÔNG SỐ KỸ THUẬT:
Software:
| ● Cisco Unified Wireless Network Software Release 8.9.x or later |
| ● Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later |
Supported wireless LAN controllers:
| ● Cisco Catalyst 9800 Series Wireless Controllers |
| ● Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
802.11ac:
| ● 4×4 downlink MU-MIMO with four spatial streams |
| ● PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) |
802.11ax:
| ● 4×4 downlink MU-MIMO with four spatial streams |
| ● Uplink/downlink OFDMA |
| ● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
Integrated antenna:
| Flexible radio (either on 2.4 GHz or on 5 GHz) |
| ● 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| ● 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth |
| Dedicated 5-GHz radio |
| ● 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth |
External antenna (sold separately):
| ● Cisco Catalyst 9120AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
| ● Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
| ● Supports Self-Identifiable Antennas (SIA) on one RP-TNC port |
Smart antenna connector:
| ● Compact multi-RF connector with DART interface |
| ● Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector |
| ● Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio |
Interfaces:
| ● 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz |
| o Auto-MDIX support |
| ● Management console port (RJ-45) |
| ● USB 2.0 @ 4.5W |
Indicators:
| ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H):
| ● Access point (without mounting brackets): 8.5 x 8.05 x 2.0” (21.6 x 21.6 x 5.1 cm) |
Weight:
| ● 3 lb (1.36 kg) |
Input power requirements:
| ● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) |
| ● 802.3af PoE |
| ● Cisco power injector, AIR-PWRINJ6= (Note: This injector supports only 802.3at) |
| ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
System memory:
| ● 2048 MB DRAM |
| ● 1024 MB flash |
