THÔNG SỐ KỸ THUẬT:
Software:
| ● Cisco Unified Wireless Network Software Release 8.10MR3 or later |
| ● Cisco IOS ® XE Software Release 17.3.1 or later |
Supported wireless LAN controllers:
| ● Cisco Catalyst 9800 Series Wireless Controllers |
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller |
802.11ac:
| ● 2×2 downlink MU-MIMO with two spatial streams |
| ● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz) |
| ● WPA3 support |
802.11ax:
| ● 2×2 uplink/downlink MU-MIMO with two spatial streams |
| ● Uplink/downlink OFDMA |
| ● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
| ● WPA3 support |
Integrated antenna:
| ● 2.4 GHz: Peak gain 3 dBi, internal antenna |
| ● 5 GHz: Peak gain 5 dBi, internal antenna |
Interfaces:
| ● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface |
| ● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget) |
| ● Management console port (RJ-45) |
| ● USB 2.0 at 4.5W |
| ● Passthru Port |
Indicators:
| ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H):
| ● Access point (without mounting brackets): 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm) |
Weight:
| ● 0.8 lb. (373.2g) |
Input power requirements:
| ● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®) |
| ● Cisco power injector, AIR-PWRINJ6= |
| ● 802.3af PoE |
| ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
