Cisco Catalyst IR1101 Rugged

Khả năng mở rộng có thể giúp kéo dài tuổi thọ của sản phẩm. Thiết kế nhỏ gọn, mô-đun, chắc chắn rất phù hợp cho các trường hợp quan trọng. Cung cấp bảo mật bộ định tuyến công nghiệp mạnh hơn và quản lý đơn giản với kiến trúc SD -WAN, tính toán biên và IOS XE

Giá tham khảo: Liên hệ

THÔNG SỐ KỸ THUẬT

Cisco IOS Software requirements

Cisco IOS XE Software: Universal Cisco IOS Software image
Cisco IOS XE Software Release 16.10.1 or later

IPv4 and IPv6 services features
Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
Generic Routing Encapsulation (GRE) and Multipoint GRE (MGRE)
Standard 802.1d Spanning Tree Protocol (STP)
Network Address Translation (NAT)
Dynamic Host Configuration Protocol (DHCP) server, relay, and client
Dynamic DNS (DDNS)
DNS proxy
DNS spoofing
Access Control Lists (ACLs)
IPv4 and IPv6 multicast
IP Service-Level Agreement (IP SLA)
Open Shortest Path First (OSPFv2 and OSPFv3)
Border Gateway Protocol (BGP)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Virtual Route Forwarding (VRF) Lite
Next-Hop Resolution Protocol (NHRP)
Serial data encapsulation and relay
L2TPv3 over sub-interfaces and VLAN

Security features

Secure connectivity

  • Secure Sockets Layer (SSL) VPN for secure remote access
  • Hardware-accelerated encryption with minimal impact to system performance
  • Next Generation Encryption (NGE) and Quantum Computing Resistant (QCR) algorithms such as AES-256, SHA-384, and SHA-512
  • Public-Key-Infrastructure (PKI) support
  • 20 IPsec tunnels
  • NAT transparency
  • Dynamic Multipoint VPN (DMVPN)
  • Tunnel-less Group Encrypted Transport VPN
  • Flex VPN
  • IPsec stateful failover
  • VRF-aware IPsec
  • IPsec over IPv6

Cisco IOS Firewall

  • Zone-based policy firewall
  • VRF-aware stateful inspection routing firewall
  • Stateful inspection transparent firewall
  • Advanced application inspection and control
  • Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
  • Dynamic and static port security
  • Firewall stateful failover
  • VRF-aware firewall

Integrated Threat Control

  • Control-Plane Policing (CoPP)
    Flexible packet matching
    Network foundation protection

QoS features

Provides LTE QoS with support for up to 8 concurrent bearers on each cellular WAN interface for traffic classification and prioritization
Provides traffic precedence to delay-sensitive and mission-critical services
Facilitates low-latency routing of delay-sensitive industrial applications
Supported on all LAN and WAN interfaces, including cellular
Low Latency Queuing (LLQ)
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Class-Based Traffic Shaping (CBTS)
Class-Based Traffic Policing (CBTP)
Policy-Based Routing (PBR)
Class-Based QoS MIB
Class of Service (CoS) to Differentiated Services Code Point (DSCP) mapping
Class-Based Weighted Random Early Detection (CBWRED)
Resource Reservation Protocol (RSVP)
Real-Time Transport Protocol (RTP) header compression (cRTP)
Differentiated Services (DiffServ)
QoS pre-classify and pre-fragmentation
Hierarchical QoS (HQoS)

High-availability features

Dual active LTE backhaul with expansion module
Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
Hot Standby Router Protocol (HSRP)
Dual SIM support on the LTE module for cellular failover

IPv6 features

IPv6 addressing architecture
IPv6 unicast and multicast forwarding
IPv6 ACLs
IPv6 over cellular
IPv6 routing
IPv6 domain name resolution