Cisco Catalyst 9120AXE

Giá tham khảo: Liên hệ

THÔNG SỐ KỸ THUẬT:

Software:

●  Cisco Unified Wireless Network Software Release 8.9.x or later
●  Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later

Supported wireless LAN controllers:

●  Cisco Catalyst 9800 Series Wireless Controllers
●  Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

802.11ac:

●  4×4 downlink MU-MIMO with four spatial streams
●  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

802.11ax:

●  4×4 downlink MU-MIMO with four spatial streams
●  Uplink/downlink OFDMA
●  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

Integrated antenna:

Flexible radio (either on 2.4 GHz or on 5 GHz)
●  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Dedicated 5-GHz radio
●  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately):

●  Cisco Catalyst 9120AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
●  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
●  Supports Self-Identifiable Antennas (SIA) on one RP-TNC port

Smart antenna connector:

●  Compact multi-RF connector with DART interface
●  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector
●  Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio

Interfaces:

●  1x 100, 1000, 2500  Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
o Auto-MDIX support
●  Management console port (RJ-45)
●  USB 2.0 @ 4.5W

Indicators:

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H):

●  Access point (without mounting brackets): 8.5 x 8.05 x 2.0” (21.6 x 21.6 x 5.1 cm)

Weight:

●  3 lb (1.36 kg)

Input power requirements:

●  802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
●  802.3af PoE
●  Cisco power injector, AIR-PWRINJ6= (Note: This injector supports only 802.3at)
●  Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

System memory:

●  2048 MB DRAM
●  1024 MB flash